Using The Usb Lan Function - Sharp MultiSync EA272Q User Manual

Using the USB LAN function

Provides stable and high-speed data communication by LAN (RJ-45) connection.
Example of LAN connection:
* Connect the monitor to the computer via a USB-C cable or USB-Type-B - Type-A cable.
Preparation Before Use
• When connecting the monitor to the computer via a USB Type-B port, set the [USB SELECTION] to [USB]. If USB-Type-C
(Upstream) port, set the [USB SELECTION] to [USB-C].
• The standard driver is installed automatically. Depending on the computer or OS, a manual driver installation may be
required (see page 40).
• Please set the [USB FUNCTIONALITY] to [ON] or [AUTO] or [90W].
• Please set the [LAN USB] to [ON].
• After connecting a LAN cable to the monitor, make sure the LED on the side of the LAN terminal lights up.
• This monitor supports 1000 Mbps communication. Please make sure to use a compatible LAN cable when connecting to a
1000 Mbps network.
• LAN-to-USB conversion may not work and depends on the computer and its operating system. Any devices connected to
the monitor or computer may cause interference. Make sure to use a compatible USB Type-C cable or USB-Type-B - Type-A
cable that transmits LAN signal; e.g., a power delivery only or USB 2.0 cable will not work.
• If LAN-to-USB conversion does not work, check if the connected computer supports LAN communication over USB. Refer to
the computer's product manual for additional information.
USB FUNCTIONALITY
OSD
USB LAN
Power state
Power
Power LED
Power Delivery
USB HUB
LAN
PSM is an abbreviation of power save mode.
Monitor
LAN LAN
USB-Type-B USB-Type-B
USB Type-C USB Type-C
(Upstream) (Upstream)
USB-C cable*
USB Type-B-A cable*
AUTO
ON
ON PSM
Blue Amber
Enable
LAN cable
ON/90W
ON
OFF ON PSM
OFF Blue Amber
OFF Enable
English−32
Router/Server
Ethernet Hub
OFF
Disable
OFF ON PSM
OFF Blue Amber
Enable Disable
OFF
OFF
OFF