Menu Items; Displaying The Menu Screen - Sharp MultiSync EA272Q User Manual

Displaying the menu screen

Key
INPUT/SELECT When the OSD menu is closed, opens the menu for the input source.
• Select an input from the inputs shown in white.
Input source is shown like below:
Yellow: Selected input source.
White: Selectable input source.
Gray: Not selectable.
• You can directly change to the [L/B] (LOW BLUE LIGHT) mode by touching this key for 3 seconds or more when
the OSD menu is closed.*
TIP: If [VIDEO DETECT] is set to [FIRST], active input is automatically switched to the newly connected input.
When the OSD menu is open, enters sub-menus in the OSD menu.
MENU/EXIT Opens the OSD menu. Closes the OSD sub-menus and main menu. You can restore the saved settings in the
[CUSTOMIZE SETTING] by touching this key for 3 seconds or more when the OSD menu is closed.
LEFT/RIGHT/ When the OSD menu is open, navigates through the OSD menu.
UP/DOWN* When the OSD menu is closed, touch one of the following keys to open the menu for the function indicated.*
2
key: [BRIGHTNESS]
key: [VOLUME]
key: [USB SELECTION]
ECO/RESET When the OSD menu is open, this key sends a reset command for the OSD settings.
When the OSD menu is closed, this key switches the [ECO MODE] status. You can set a mode from [OFF], [1] and [2].*
Turns the monitor on and off.
⏻ (POWER)
Power LED Indicates that the power is on or off.
* : When the [HOT KEY] function is [OFF], this function is disabled.
1
* : Depending on the [OSD ROTATION] setting, [LEFT], [RIGHT], [UP] and [DOWN] key guides are displayed at the
2

Menu Items

Function
1
English−22
1
, , , keys differently (see page
1
29).