• Transcribing or duplicating part or all of this manual and/or this software without permission from our company is not permitted. • As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units.
To use the touch panel, the touch panel driver must be installed from the supplied CD-ROM and the touch panel must be connected to your PC. Installing the touch panel driver The touch panel driver is a program that enables you to use the touch panel to operate the PC that is connected to the touch panel.
The touch panel driver starts automatically and the icon ( Caution • When using the touch panel, set the “SIZE” of the monitor to “WIDE”, “NORMAL”, or “Dot by Dot”. The touch panel cannot be used when the “SIZE” is set to “ZOOM1” or “ZOOM2”. •...
Calibration Calibration is used to perform position alignment so that the mouse cursor moves to the correct position when the screen is touched. Caution • Do not perform calibration in “Tablet PC Settings” in Control Panel. Calibration will not take place correctly. • When setting the “Simple” on PN-L802B, change the screen size to “Wide” and set the “Advanced” beforehand. When the screen size is “NORMAL” or “Dot by Dot” and the “Advanced” is set before the “Simple”, the mouse cursor may be out of position. nCalibration Method Simple Select the currently displayed screen size (“WIDE”, “NORMAL”, “Dot by Dot”), and calibration takes place automatically. Calibrate using advanced calibration if the mouse cursor is out of position when the touch pen is used. TIPS • When a key has been assigned to the “Easy Change” hot key setting, the key can be pressed to successively change a setting.
Touch Panel Settings Properties Settings for the touch pen can be configured in the properties. Select a tab to change a setting on that tab. nDouble Click Range Setting (Single touch mode) Set how much the position can shift between the first touch and the second touch and still be recognized as a double-click. Set the range based on how you use the touch pen.
nOperation Setting Function Button 1 Set the function that activates when function button 1 is pressed with the touch pen. • RightClick : Functions as a right click. • Disable : Disables function button 1. Function Button 2 Set the function that activates when function button 2 is pressed with the touch pen. •...
• If you are using icon view (Classic View), double-click “Programs and Features”. • In Windows XP, click “Add or Remove Programs”. (In the “Classic View”, double-click “Add or Remove Programs”.) 5. Remove “SHARP Touch Panel Driver”. • Follow the on-screen instructions.