Sharp MultiSync EA272Q User Manual page 30

Menu Items
MENU TOOLS Menu
HOT KEY
ON
BRIGHTNESS
VOLUME
USB SELECTION
ECO MODE
OFF
SIGNAL INFORMATION
ON
OFF
SENSOR INFORMATION
ON
OFF
KEY GUIDE
CUSTOMIZE SETTING
When this function is [ON], [BRIGHTNESS], [VOLUME] and [ECO MODE] can be changed without
opening the OSD menu.
Touch the key, then adjust the [BRIGHTNESS] level in the sub-menu that opens.
Touch the key, then adjust the [VOLUME] level in the sub-menu that opens.
Touch the key to open the USB SELECTION sub-menu.
Touch the ECO/RESET key, the [ECO MODE] sub-menu opens. You can toggle among 3 selections:
[OFF], [1] and [2].
The [HOT KEY] function for the ECO/RESET key,
If you select [ON], the monitor displays "VIDEO INPUT" after changing the input.

TIP: The compliance marks that are shown when powering on the monitor the first time are not shown
when switching inputs.

T he compliance marks are not shown again unless the AC power cord has been disconnected at
the power off status and reconnected.
If you select [OFF], the monitor does not display "VIDEO INPUT" after changing the input.

TIP: Setting [OFF] also prevents the compliance marks from being shown when powering on the monitor.
If you select [ON], the monitor displays a "HUMAN SENSOR ON" message.
If you select [OFF], the monitor doesn't display the "HUMAN SENSOR ON" message.
If you select [ON], the Key Guide appears on screen when the OSD menu is accessed.
Store the current settings for easy recovery.
To store current settings: Open the OSD menu, select [CUSTOMIZE SETTING], then touch the INPUT/
SELECT key. Touch the ECO/RESET key, the current settings are stored.
To restore settings: Touch the MENU/EXIT key for 3 seconds or more when the OSD menu is closed.
key,
English−30
key and key are disabled.