Sharp MultiSync EA272Q User Manual page 16

Parts name and Connecting Peripheral Equipment
nDigital input
• HDMI – High-definition digital video and audio signal connection to a computer, streaming media player, Blu-ray player,
game console, etc.
• DisplayPort – High-definition digital video and audio signal connection to a computer.
• USB Type-C – Supports DisplayPort input of high-definition digital video and audio signal (DisplayPort Alt Mode on USB
Type-C only) connection to a computer. This display does not support other USB Type-C Alt Modes such as MHL and HDMI.
This port is not for use with USB devices such as mice, keyboards, or USB flash drives.
Depending on the computer, you may need to manually set the computer's audio to output through the DisplayPort, HDMI, or
USB Type-C connection. Please refer to the computer's user manual.
The type of video connections that can be used to connect to a computer depends on the computer's display adapter.
For HDCP Content
HDCP is a system for preventing illegal copying of video data sent over a digital signal. If you are unable to view material
via the digital inputs, this does not necessarily mean that the monitor is not functioning properly. With the implementation of
HDCP, there may be cases in which certain content is protected by HDCP and might not be displayed due to the decision/
intention of the HDCP community (Digital Content Protection, LLC). HDCP video content is generally commercially produced
Blu-rays and DVDs, television broadcast, and streaming media services.
nConnecting to a Computer with HDMI
• Please use a HighSpeed HDMI cable with the HDMI logo.
• It may take a moment for the signal to appear after turning on the computer.
• Some display cards or drivers may not display an image correctly.
• If the monitor's power is turned on after a connected computer is turned on, sometimes an image is not displayed. In this
case, please turn off the computer then turn it on again.
English−16