Pavone Systems DAT 700 Technical Manual page 12

Press and hold the following keys simultaneously for a long time on the weight display screen to access
the programming menu.
Alternatively, to access the programming menu press and hold the following key in the weight display
screen for 6 seconds.
If a password is programmed, (see menu funct) you will be prompted to set that password to access the
menu.
Menu Sub Menu
ANALOG.
F1ELDB.
COM.POR.
SETUP
UPL.DOW.
ACCESS
ALI.MEM.
pag. 12
PROGRAMMING MENU
PRG
PRG
CALIBR.
1N-OUT
PARAM.
FILTER
FUNCT
SET
+
6 seconds
Calibration Settings (*)
Analog output settings (
Fieldbus selection
Fieldbus and serial ports settings
Logic Input and Output Settings
Metrological Weighing Parameter Settings (*)
Filter Settings
Functional Features Settings
Set up memory upload/download function
Display last 5 authorized personnel accesses (**)
Fiscal memory consultation (**)
Name
Only with analog output configured
DAT700 Instrument User Manual
)