Cgn-Bar Code Symbologies; Fo & Fj Character Starting Positions - Microcom 238B Operator's Manual

Chapter 4
Code 93
AS-10
MSI (Modified Plessey)
* These Symbols must use the CMX or CMY multipliers by 2 to produce an 80% ratio.
** The "FO" field represents the available Field Orientation or print rotation.
4.6.7 FO (Field Orientation)
This parameter defines the rotation of the format field on the label. The point of rotation is
determined from the Field Justification parameter.
0
1
2
3
4.6.8 FJ (Field Justification)
This parameter defines the justification of the format field on the label.
0
1
2
3
4
5
Table 4-8 shows how to obtain the proper character placement or starting positions relative
to the format field's orientations and justifications.
ROTATION
0 & 180 Degrees
90 & 270 Degrees
Table 4-7
238B Operator's Manual - 880053-0101
5
-
-
-
Table 4-6 CGN—Bar Code Symbologies
0 degrees (normal rotation)
180 degrees (upside-down rotation)
270 degrees (right rotation)
90 degrees (left rotation)
Left Justified above the base-line
Right Justified above the base-line
Left Justified below the base-line
Right Justified below the base-line
Centered above the base-line
Centered below the base-line
FIELD ORIENTATION and JUSTIFICATION
0 – Left justified above the base-line
1 – Right justified above the base-line
2 – Left justified below the base-line
3 – Right justified below the base-line
4 – Centered above the base-line
5 – Centered below the base-line
0 – Left justified above the base-line
1 – Right justified above the base-line
2 – Left justified below the base-line
3 – Right justified below the base-line
4 – Centered on the Y axis, right of X coordinate
5 – Centered on the Y axis, left of the X coordinate
FO & FJ Character Starting Positions
Designing Labels with LDS
5:2 1
2:1 1
2:1 1
1:1 1
- 0123
- 0123
- 0123
- 0123
4-15