Cgn-Bar Code Symbologies - Microcom 438 Operator's Manual

Designing Labels Using LDS
SYMBOL
Code 39
I 2 of 5
UPC / EAN *
UPC Readable *
Code 128 & UCC / EAN 128 *
Codabar
Code 93
AS-10
MSI (Modified Plessey)
* These Symbols must use the CMX or CMY multipliers by 2 to produce an 80% ratio.
** The "FO" field represents the available Field Orientation or print rotation.
4.6.7 FO (Field Orientation)
This parameter defines the rotation of the format field on the label. The point of rotation is
determined from the Field Justification parameter.
0
1
2
3
4.6.8 FJ (Field Justification)
This parameter defines the justification of the format field on the label.
0
1
2
3
4
5
Table 4-8 shows how to obtain the proper character placement or starting positions relative
to the format field's orientations and justifications.
4-16
Bar Code Symbologies
CGN
VALUE
2
3
5
8
2
3
5
-
-
-
2
3
5
-
-
-
Table 4-7 CGN—Bar Code Symbologies
0 degrees (normal rotation)
180 degrees (upside-down rotation)
270 degrees (right rotation)
90 degrees (left rotation)
Left Justified above the base-line
Right Justified above the base-line
Left Justified below the base-line
Right Justified below the base-line
Centered above the base-line
Centered below the base-line
RATIO HEIGHT
2:1 1
3:1 1
5:2 1
8:3 1
2:1 1
3:1 1
5:2 1
40 % 1
40 % 1
40 % 1
2:1 1
3:1 1
5:2 1
2:1 1
2:1 1
1:1 1
438 Operator's Manual - 880052-0103
Chapter 4
SPACING FO **
2 0123
2 0123
2 0123
3 0123
- 0123
- 0123
- 0123
- 0123
- 0123
- 0123
- 0123
- 0123
- 0123
- 0123
- 0123
- 0123