Microcom 238B Operator's Manual page 177

Chapter 10
4. Unlatch and raise the Print Head.
5. With a lint-free cloth dampened in alcohol, clean the drive roller. Manually rotate the
Drive Roller by the Drive Roller Gear located to the left (from the front of the printer) or
by manually rotating the Drive Roller itself to clean the entire Drive Roller surface.
6. Print Head and internal cleaning may also be performed at this time, see the appropriate
sections for more information.
7. Latch the Print Head completely and reinstall the Top Cover and media.
8. Turn the printer power "ON."
10.7 Exterior Cleaning
Although cleaning the exterior surfaces has no effect on the printer's performance, it will
help the overall appearance of the printer. The use of any mild, non-abrasive general
purpose cleaner with a lint-free cloth may be used to clean the exterior surfaces. This
cleaning should be performed on an as needed basis.
238B Operator's Manual - 880053-0101
Printer Maintenance
10-7