Cgn-Bar Code Symbologies; Fo (Field Orientation); Fj (Field Justification) - Microcom 224 Operator's Manual

Designing Labels Using LDS
For Example: If a TCI of 40 is selected the CGN will be omitted by entering nothing for the
CGN and surrounding the parameter with the comma delimiter.
1,200,200,10,40,,0,0,100,1
SYMBOL
Code 39
I 2 of 5
UPC / EAN *
UPC Readable *
Code 128 & UCC / EAN 128 *
Codabar
Code 93
AS-10
MSI (Modified Plessey)
* These Symbols must use the CMX or CMY multipliers by 2 to produce an 80% ratio.
** The "FO" field represents the available Field Orientation or print rotation.
4.6.7 FO (Field Orientation)
This parameter defines the rotation of the format field on the label. The point of rotation is
determined from the Field Justification parameter.
0
1
2
3
4.6.8 FJ (Field Justification)
This parameter defines the justification of the format field on the label.
0
1
2
3
4
5
4-16
Bar Code Symbologies
CGN
VALUE
2
3
5
8
2
3
5
-
-
-
2
3
5
-
-
-
Table 4-7 CGN—Bar Code Symbologies
0 degrees (normal rotation)
180 degrees (upside-down rotation)
270 degrees (right rotation)
90 degrees (left rotation)
Left Justified above the base-line
Right Justified above the base-line
Left Justified below the base-line
Right Justified below the base-line
Centered above the base-line
Centered below the base-line
RATIO HEIGHT
2:1 1
3:1 1
5:2 1
8:3 1
2:1 1
3:1 1
5:2 1
40 % 1
40 % 1
40 % 1
2:1 1
3:1 1
5:2 1
2:1 1
2:1 1
1:1 1
224/424 Operator's Manual - 880027-0141
Chapter 4
SPACING FO **
2 0123
2 0123
2 0123
3 0123
- 0123
- 0123
- 0123
- 0123
- 0123
- 0123
- 0123
- 0123
- 0123
- 0123
- 0123
- 0123