Operation; Standard Airbath - MTI Designer Series Installation And Operation Manual

Installation and Operational
Operation Instructions
Keypad style and functions may vary according to tub model, therapeutic features and selected options. Whirlpool packages vary and
may be personalized to include optional micro jets (See pg. 26).

Standard Airbath

System 1
AIRBATH
1st Press: The blower starts at 50% speed. LED indicator light on.
2nd Press: The blower stops. LED indicator light off.
NOTE: Blower automatically stops after 20 minutes.
THERAPY CONTROL
Use arrow buttons to gradually adjust airbath intensity. Minimum speed is 20%.
AIR MASSAGE MODE
1st Press (Wave): Speed varies gradually from maximum to minimum. LED indicator light is on.
2nd Press (Pulse): Speed alternates quickly between minimum and maximum. LED indicator light will flash.
3rd Press (Max): Returns to maximum speed. LED indicator light off.
Airbath Drying Cycle
Floor sensors near drain activate drying cycle approximately 7 minutes after the bath is drained. Drying cycle will run for 1-2 minutes.
Airbath LED indicator light will blink during countdown. See details on pg. 24.
WARNING!
Always fill tub 1" above highest jet. Starting whirlpool at insufficient water level could result in damage.
⁴ MTI will not be responsible for water damage in areas outside of the tub caused by improper operation.
18 / mtibaths.com
Manual •
Designer
Visit https://mtibaths.com/media-news/videos/support-videos/
Collection •
Whirlpool and Airbaths
for detailed operation instructions.