Endless Pools HYDROSTRIDE Owner's Manual page 10

2. Attach the Bottom Plates (A) to the underside of the Hydrostride using the 1" (25mm) Phillips Truss Head Screws (B)
(Fig. 4). After this step has been completed, carefully lower the unit to the ground.
B
A
B
A
Fig. 4
3. Attach the End Standoff (A) to the front of the Hydrostride using the 1" (25mm) Phillips Truss Head Screws (B) (Fig. 5).
B
A
Fig. 5
9