Correcting Ladder Programs
3-5
Correcting Ladder Programs
3-5-1
Changing Inputs
Move the
highlighted cursor
to the input to be
changed.
3-5-2
Changing Additional Bit Output Functions
Move the
highlighted cursor
to the output to be
changed.
Change contact Q0 to M1.
▼
Press the OK Button to change the
highlighted cursor to a flashing cursor and
move the flashing cursor to the bit type
▼
position.
Use the Up/Down Buttons to select M.
Press the Right Button to move the flashing
cursor to the bit address position. Use the
Up/Down Buttons to change the bit address
▼
from 0 to 1.
Press the OK Button to complete the setting
change.
Change the additional function for the input
for Q0 to S (Set).
▼
Press the OK Button to change the
highlighted cursor to a flashing cursor.
▼
Press the Left Button to move the flashing
cursor to the additional function position.
Press the Up Button twice to change the
▼
additional function from [ to S.
Press the OK Button to complete the
change.
Section 3-5
71