Deleting Error Messages - Omron ZEN Operation Manual

Deleting Error Messages

6-3 Deleting Error Messages
A flashing error message is displayed when an error occurs. Turn OFF the
power supply and remove the cause of the error.
Press any operation button to delete the error message. Once the error
has been removed the display will return to normal.
Error Message
Display
Screen
Note
ERR
ERR will remain on the
display.
118
I/O VRFY ERR
The error display will remain for internal errors that cannot be
fixed, such as I/O Bus errors and I/O Unit Over errors.
Press either the ESC, OK, DEL, ALT, Left/
Right, or Up/Down Buttons. Any button can
be pressed to delete the error message.
Press any button to return to normal display.
Section 6-3