Omron ZEN Operation Manual page 50

Nomenclature and Basic Operation
26
Press the ALT Button with the highlighted
cursor in the input writing position to change
the cursor to a flashing left arrow to enable
▼
connecting lines to be drawn.
Up/Down Buttons: Draw vertical connecting
lines.
Left/Right Buttons: Draw horizontal
connecting lines.
Press the Right Button twice to draw a line to
the output bit. The cursor will change to a
highlighted cursor at the output bit write
▼
position.
Press the OK Button at the output bit write
position to display the default output Q0. Q
will flash.
▼
• Flashing Cursor at the Q (Bit Type)
Position
Up/Down Buttons: Change the type of
▼
output
Right/Left Buttons: Move the flashing
cursor.
▼
OK Button: Sets the bit type and moves
the flashing cursor to the bit address
position.
• Flashing Cursor at the (Additional
Output Function) Position
Up/Down Buttons: Selects the additional
output function
OK Button: Sets the additional output
function and moves the flashing cursor
to the bit address position.
• Flashing Cursor at the 0 (Bit Address)
Position
Up/Down Buttons: Select the bit address
OK Button: Completes the output write.
Press the OK Button to complete the bit write
01
and to move the highlighted cursor to the first
input position ON the next line.
▼
Press the ESC Button to complete the writing
of the ladder program and to return to the
menu screen.
Section 1-3