Settings In The Parameter Settings Screen - Omron ZEN Operation Manual

Displaying Messages (Display Bits (D))
3-13-2

Settings in the Parameter Settings Screen

Display address
Character string cursor position
Backlight/display
function screen
switching
Display start
position
Display object
Monitor enabled/
disabled
Note
Backlight/display function screen switching
Monitor enabled/disabled
Display start position
Display object
Display character string
(Set when character string selected as display object.)
Display character string candidates
L0 No backlight; No switching to display function screen (See note 1.)
L1 Backlight; No switching to display function screen (See note 1.)
L2 No backlight; Switching to display function screen (See note 2.)
L3 Backlight; Switching to display function screen (See note 2.)
X (digit): 00 to 11
Y (line): 0 to 3
X00 to
Y0
to
Y3
CHR Characters (12 max.: Alphanumeric characters and symbols)
DAT Month/day (5 digits: @@/@@)
DAT1 Day/month (5 digits: @@/@@)
CLK Hour/minutes (5 digits: @@:@@)
Analog conversion (4 digits: @@.@)
I4, I5
(Ia, Ib)
T0 to Tf Timer present value (5 digits: @@.@@)
#0 to #7 Holding timer present value (5 digits: @@.@@)
C0 to Cf Counter present value (4 digits: @@@@)
8-Digit counter present value (8 digits: @@@@@@@@)
F0
A Operating parameters can be monitored.
D Operating parameters cannot be monitored.
1. When L0 or L1 are selected to disable the display function screen,
the display function screen will not be displayed automatically.
Use operation buttons to move to the display function screen.
2. When L2 or L 3 are selected (switching to display function
screen), the ZEN switches to the display function screen if the
display function is enabled and the specified data is displayed.
The Main Screen will no longer be displayed. To display the Main
Screen, change the CPU Unit to STOP mode.
Section 3-13
to X11
97