Settings In The Parameter Settings Screen - Omron ZEN Operation Manual

Using Weekly Timers (@)
3-8-2

Settings in the Parameter Settings Screen

Normal Operation (N)
Note
Operation between Days (D)
Weekly timer address
Type of operation
Start day
Stop day
Monitor enabled/disabled
When the flashing cursor is on the start day, press the Right
Button and then the Up/Down Buttons to set the stop day. If the
stop day is not set, the timer will operate according to the set time
only.
Type of N
operation
D
P
Day Start day
Stop day
Time Start time
Stop time
Operating time
Monitor A
enabled/
disabled
D
Weekly timer address
Type of operation
Start day
Monitor enabled/disabled
@0 D A
Start time
ON SU 01:10
Stop time
OFFMO 03:31
Stop day
Start time
Stop time
Normal
Between days
Pulse
Sun/Mon/Tues/Wed/Thurs/Fri/Sat
Sun/Mon/Tues/Wed/Thurs/Fri/Sat/None
00:00 to 23:59
00:00 to 23:59
00:01 to 99:59 (mm:ss)
Operating parameters can be monitored and
settings changed.
Operating parameters cannot be monitored
or settings changed.
Section 3-8
83