Correcting Ladder Programs; Changing Inputs; Changing Additional Bit Output Functions - Omron ZEN Operation Manual

Correcting Ladder Programs

3-5

Correcting Ladder Programs

3-5-1

Changing Inputs

Move the
highlighted cursor
to the input to be
changed.
/
3-5-2

Changing Additional Bit Output Functions

Move the
highlighted cursor
to the output to be
changed.
64
Change contact Q0 to M1.
Press the OK Button to change the high-
lighted cursor to a flashing cursor and move
the flashing cursor to the bit type position.
Use the Up/Down Buttons to select M.
Press the Right Button to move the flashing
cursor to the bit address position. Use the
Up/Down Buttons to change the bit address
from 0 to 1.
Press the OK Button to complete the setting
change.
Change the additional function for the input
for Q0 to S (Set).
Press the OK Button to change the high-
lighted cursor to a flashing cursor.
Press the Left Button to move the flashing
cursor to the additional function position.
Press the Up Button twice to change the
additional function from [ to S.
Press the OK Button to complete the
change.
Section 3-5