Nomenclature and Basic Operation
Menu Screen Configuration
RUN Mode
MONITOR
STOP
PARAMETER
SET CLOCK
▼
RUN
STOP Mode
PROGRAM
RUN
PARAMETER
SET CLOCK
▼
Date and Time Settings (Refer to page 58.)
PROGRAM
RUN
PARAMETER
SET CLOCK
▼
Display Language Settings (Refer to page 57.)
SET CLOCK
LANGUAGE
▲ ▼
Communications Settings (Models with Communications Only)
PARAMETER
SET CLOCK
LANGUAGE
RS485
▲ ▼
Other Settings
PARAMETER
SET CLOCK
LANGUAGE
OTHER
▲
22
Ladder Monitor Screen
RUN
Switches to STOP mode.
The operation status of the timers, counters, and analog
comparators can be monitored and the settings changed
during operation. Refer to page 27.
EDIT PROG
DELETE PROG
CASSETTE
Switches to RUN mode.
Changes the settings for timers, counters, and analog comparators.
(Refer to page 30.)
SET CLOCK
SUMMER TIME
LANGUAGE
ENGLISH
NODE NO
COM SPEED
DATA BIT
STOP BIT
▼
COM SPEED
DATA BIT
STOP BIT
PARITY
▲
PASSWORD
BACKLIGHT
INPUT FILTER
SYSTEM INF
▼
The ON/OFF status of input bits can be checked by
monitoring the ladder program.
EDIT PROGRAM
NO
YES
▲ ▼
Select YES with
Deletes ladder program and parameters.
Memory Cassette Operation (Refer to page 111.)
SAVE(CPU-MC)
LOAD(MC-CPU)
ERASE
Note: Displayed only when a Memory
Cassette is mounted.
SET CLOCK
yy/mm/dd
00/01/01
00:03(SA)
Set when shipping to countries that
use summer time. (Refer to page 107.)
The display language can be changed.
English, Japanese, German, French, Italian, and
Spanish
Settings are made for communications with
external devices. (Refer to the ZEN
Communications Manual (Z212).)
Other settings can be made. Refer to the following
page for details.
Section 1-3
Ladder Program Edit Screen
(Refer to page 25.)
Creates and edits
ladder program.
Transfers programs
between ZEN and
the Memory Cassette
and initializes the
Memory Cassette.
Sets the date and
time.