Changing The Screen Display - Omron Z550 Operation Manual

Changing the Screen Display

It is possible to change the items displayed on the Image Monitor, Digital Monitor, Trend Monitor, and
Profile Monitor screens.
The contents that can be changed vary depending on the type of screen.
Changing the Image Monitor Screen Display
This function can be used for enlarging the profile and line brightness displays. The position of
the line brightness cursor can also be changed.
Enlarging Display
The profile and line brightness in the specified range are enlarged and displayed.
Set
Scn 0
NEAR
Specified
range
FAR
1.
Display the Image Monitor screen and press the
SHIFT and ENT Keys.
Other Functions
Set
Scn 0
NEAR
FAR
The line brightness graph for the specified
range is enlarged in Run Mode.
Scn 0 Run
NEAR
FAR
OUT 0
+005.188000
S+ / :Display S+ENT:Adjust
SECTION 4
99.60ms
Sen0
[ 25]
LV
[ 50]
PEAK
Sen1
[ ]
LV
[ ]
PEAK
Zero's OFF
mm PASS
Z550
141
Operation Manual