Omron Z550 Operation Manual page 129

Hold output
1.
Select [ ] and then [Hold&Logging].
Extra set
The selections appears.
2.
Select [Logging].
The setting screen for logging conditions appears.
3.
Set the storing rate.
(1 to 10000 samples)
4.
Select the action to be taken when the amount of
accumulated data reaches the maximum capacity of
the memory.
Option
Over write Overwrite data starting with the oldest
data.
Write once The data accumulation is stopped
when the maximum amount of
accumulated data is exceeded or the
maximum capacity of the memory is
reached.
The accumulation time based on the specified data is
displayed.
5.
Select [Execute].
The setting will be registered and the screen display returns to
The logging data accumulated so far is cleared.
Setting Measurement Conditions (Expert Menu)
p.118
Meaning
Scn 0 Set
Image
Detect set
Meas set
Extra set
# to avg
Meas mo
Hold&Logging
Output
Details
Free
Hold (External)
Hold (Self)
Logging
Store rate :
Store mode: Over write
Execute Cancel
Trend : 29.880 [H]
Profile 2.988 [H]
Logged data will be cleaned
and set will be updated.
OK?
Execute Cancel Back
1
.
SECTION 3
[ 300]
Z550
127
Operation Manual