Omron Z550 Operation Manual page 127

A setting screen for the measurement start position
appears.
13.
Specify the measurement start position.
If the trigger on position and the measurement target area
are different, specify the time difference.
The measurement start position can be the same as the
trigger on position if it is not necessary to specify the time
difference.
A setting screen for the measurement end position
appears.
14.
Specify the measurement end position.
Specify the end position when there is a time difference
between the completion of the measurement and the
trigger off timing.
The measurement end position can be the same as the
trigger off position if it is not necessary to specify the time
difference.
A confirmation message appears.
15.
Select [Execute].
The setting will be registered and the screen display returns to
Setting Measurement Conditions (Expert Menu)
Measurement start position
Hold
Start of measurement
Time from trigger ON
to start of measurement
Trigger setting
Start of measurement
End of measurement
The settings
will be changed.
Execute
6
.
SECTION 3
239.04ms
Measurement end position
239.04ms
2151.36ms
Time from start to
end of measurement
OK?
Cancel Back
Z550
Operation Manual
125