Omron Z550 Operation Manual page 147

Changing the Digital Monitor Screen Display
It is possible to change the contents displayed in the left part of the screen display.
The default setting at the shipment is to display the judgment upper and lower limits.To display
measurement item names, change the settings.
[Judgment value display] (Default setting)
Scn 0 Run
+0002.65432mm HI=+0005.00000
0
PASS LO=-0000.00000
+0004.65432mm HI=+0010.00000
1
PASS LO=-0005.00000
-----------mm HI=+0010.00000
2
ERROR LO=-0005.00000
-----------mm HI=+0010.00000
3
LO=-0010.00000
SFT+ / :Display SFT+ENT:Adjust
Judgment upper/lower limit
1.
Display the Digital Monitor screen and press the
SHIFT and ENT Keys.
The adjustment menu appears.
2.
Press the TRIG Key.
Other Functions
[Measurement item display]
Scn 0 Run
+0002.65432mm Height
0
PASS
+0004.65432mm Step: 2 pts
1
PASS
-----------mm Width
2
ERROR
-----------mm
3
SFT+ / :Display SFT+ENT:Adjust
Measurement item name
Scn 0 Run
+0002.65432mm HI=+0005.00000
0
PASS LO=-0000.00000
+0004.65432mm HI=+0010.00000
1
PASS LO=-0005.00000
-----------mm HI=+0010.00000
2
ERROR LO=-0005.00000
-----------mm HI=+0010.00000
3
LO=-0010.00000
SFT+ / :Display SFT+ENT:Adjust
ESC TRG
Display
Sensitvy
Output
Meas set
Extra set
SECTION 4
ENT
Test
Z550
145
Operation Manual