Omron Z550 Operation Manual page 26

SECTION 2
Basic Operations
Inputting Values
This section explains how to input values required in order to set judgment conditions.
1.
Move the cursor to the item for which a value is to
be changed.
2.
Press the ENT Key.
The cursor size will change to the size of a single digit.
3.
Move the cursor to the digit to be changed.
Left/Right key: Moves the cursor to the left/right.
4.
Change the value.
Up key: Increases the value.
Down key: Decreases the value.
5.
Repeat this operation to change other digits.
6.
Press the ENT Key.
The value will be set.
Z550
24
Operation Manual
Expert menu:
Under [Set/Image/Details]
Scn 0 Set
Priority Sampling time
Upper
Lower
Gradations
End
Scn 0 Set
Priority Sampling time
Upper
Lower
Gradations
Scn 0 Set
Priority Sampling time
Upper
Lower
Gradations
Scn 0 Set
Priority Sampling time
Upper
Lower
Gradations
[25]
[ 1]
[170]
[25]
[ 1]
[170]
[25]
[ 1]
[190]
[25]
[ 1]
[190]