Omron Z550 Operation Manual page 100

SECTION 3
Setting Measurement Conditions (Expert Menu)
Changing Measurement Items
The measurement items that have been set for the outputs can be changed.
Clear any previously set measurement items in order to assign other measurement items.
1.
Move the cursor to the output whose item is to be
changed, and press the ENT Key.
The selections appear.
2.
Select [Change].
The setting screen for measurement range appears.
The remaining procedures are the same as those for measurement item setting.
Z550
98
Operation Manual
Scn 0 Set
OUT0:Height
OUT1:Step: 2 pts
OUT2:
OUT3:
OUT4:
OUT5:
OUT6:
OUT7:
Scn 0 Set
Change
Calibrate
Output
Delete