Screen Display And Monitor; Measurement Screen Settings; Selecting Color Or Monochrome Monitors - Omron F160 Operation Manual

Screen Display and Monitor

5-3

Screen Display and Monitor

5-3-1

Measurement Screen Settings

Note The default setting is marked with an asterisk.
SeeAlso
5-3-2

Selecting Color or Monochrome Monitors

SeeAlso
104
Select the type of image to be displayed in Run Mode and Monitor Mode. The
display settings made here will be reflected in all scenes.
Selection
Freeze* A still of the image taken by the Camera is displayed. This image is
updated when measurement is performed.
Select Freeze when measuring moving objects.
Through The latest image taken by the Camera is displayed directly.
If measurement is performed using Through display, the measurement
time will be increased by the amount of time from when the measure-
ment command is input until the image input starts. This delay is
included in the measurement time shown on the Monitor and Run
Mode screens.
1. Enter System mode and select Display.
Refer to page 102.
The Display Settings/Monitor/Designate Colors/Make Colors Menu will be
displayed.
Display settings
Monitor
Designate colors
Make colors
2. Select Display settings.
The Display Settings Screen will be displayed.
Display settings
Display image
End
3. Change the settings for each item.
4. Select End.
The settings will be registered and the screen in (2.) will return.
Select the type of monitor to be connected. When color monitors are used,
characters and figures can be color-coded and displayed in color.
1. Enter System mode and select Display.
Refer to page 102.
Details
:
Freeze
Section 5-3