Omron Z550 Operation Manual page 15

Simple Setup Using Menus
The Controller is equipped with two types of menus.
If this is the first time you
operate the Controller
If you want to set up the
measurement conditions
as you wish by utilizing
various functions
How to switch between the menus p.175
Monitoring While Viewing the Measurement Status
It is possible to visually keep track of how a workpiece is being detected on the monitor screen.
It is also possible to output the displayed profile (distribution of height measurement values) to a
PC.
Sensor
Line beam
Twelve Types of Measurement Items
The Controller allows selection from 12 different measurement items, such as height, width, and
cross-sectional area, according to the specific purpose.
Simultaneous measurement of up to 8 items can be performed.
p.70
conversational menu
Please use the
You can set up the measurement conditions with ease
by simply entering the information according to the
operation guidance that appears on the screen.
p.32
expert menu
Please use the
It is possible to switch to the expert menus after setting
up the conditions by using the conversational menu in
order to make further adjustments.
p.47
Profile
Scn 0 Run
NEAR
FAR
SECTION 1
Features
.
.
99.60ms
Sen0
[ 15]
LV
[ 170]
PEAK
Sen1
[ ]
LV
[ ]
PEAK
Z550
Operation Manual
13