SECTION 2
Basic Operations
Profile Monitor
This monitor screen allows checking the profile using a shaded 3D image.
Move the workpiece in order to check the height information of one specified point in a time
series.
This monitor screen is convenient when checking the installation conditions of the sensor.
Movement
orientation
Shaded 3D Image Display and Profile Display
The profile or one horizontal line in the shaded 3D image is displayed at the lower part of the
screen.
How to change the cursor position p.155
Z550
28
Operation Manual
Shaded 3-D image display
Thru
Sen 0
S+ / :Display S+ENT:Adjust
Shaded 3-D Image
Dark area: Low
Bright area: High
Scn 0
Run
1div T: 0.996 [s]
V:0.1250[mm]
Thru
Trend Display
Scn 0
Run
1div T: 0.996 [s]
V:0.1250[mm]
+005.188000
mm
Profile Cursor (Red)
Profile Display
Profile Display
99.60ms
PASS