Omron Z550 Operation Manual page 200

SECTION 6
Communication with External Devices
Start data
End data
Data interval
(Valid only during
XMODEM transmission)
Data size
(Valid only during
XMODEM transmission)
Data unit
(Valid only during text
transmission)
Z550
198
Operation Manual
Item Option/Setting range
0 to 1023
(Set to 0 by default
setting)
0 to 1023
(Set to 1023 by
default setting)
1 to 1024
(Set to 1 by default
setting)
3 bytes (default
setting)
2 bytes
mm (default setting)
µm
Meaning
Specify the range of transmission target lines. The
communication time can be shortened by limiting the
range to only the required lines.
Specify the range in such a way that the transmission
start is equal to or less than the transmission end.
Specify the interval at which lines are skipped in the
XMODEM communication. When the data is
transmitted, the number of lines specified here is
skipped for each line sent.
Example: When the transmission step is set to "3"
1024
Output Output Output
Select the data size used in the XMODEM
transmission.
• 3 bytes: Transmitted in 1 µm units.
• 2 bytes: Transmitted in 100 µm units.
Select the unit used when sending data in the text
format.