Fins Commands For Sysmac Link Units; Data Link Start; Data Link Halt; Reset - Omron CS1W-SLK11-21 - 06-2004 Manual

FINS Commands for SYSMAC LINK Units

6-4

FINS Commands for SYSMAC LINK Units

6-4-1

DATA LINK START

Command Block
Response Block
6-4-2

DATA LINK HALT

Command Block
Response Block
6-4-3

RESET

Command Block
112
Activates data links in the SYSMAC LINK Network.
This command will be completed normally when link words are allocated
automatically or via data link tables only.
04 01
Command
code
04 01
Command Response
code code
Stops data links in the SYSMAC LINK Network.
This command will be completed normally when the data link is in operation. If
the data link is not in operation, an error will occur.
04 02
Command
code
04 02
Command Response
code code
Resets the SYSMAC LINK Unit.
No response is returned when this command is executed.
04 03
Command
code
Section 6-4