Omron CS1W-SLK11-21 - 06-2004 Manual page 10

About this Manual:
This manual describes the installation and operation of CS-series SYSMAC LINK Units and includes
the sections described below.
Please read this manual completely and be sure you understand the information provide before
attempting to install and operate a SYSMAC LINK System including CS-series SYSMAC LINK Units.
Section 1 Introduction introduces the features and operations of the SYSMAC LINK Units.
Section 2 Unit Components and Switch Settings describes the names and functions of the SYS-
MAC LINK Unit components and switch settings.
Section 3 Basic Communications describes the token bus method of communications used in SYS-
MAC LINK Systems, as well as the basic settings necessary for operation.
Section 4 Data Links describes the operation of data links, procedures required to establish data
links, and methods of monitoring data link operations.
Section 5 Network Data Exchange provides the details of the data exchange functions of the CS-
series PLCs via SYSMAC LINK Networks.
Section 6 Message Service describes the PLC ladder network instructions and FINS commands that
can be used to transfer data and control operation via a SYSMAC LINK System.
Section 7 Remote Monitoring and Programming provides information on remote programming and
monitoring.
Section 8 Troubleshooting provides information to help identify and correct errors that might occur.
Section 9 Unit Replacement describes the replacement procedure and provides cautions for Unit
replacement.
Section 10 Inspection and Maintenance contains information describing periodic inspections
required by the System.
Appendices contain information describing SYSMAC LINK Unit models, their dimensions, and area
allocations.
!WARNING
Failure to read and understand the information provided in this manual may result in per-
sonal injury or death, damage to the product, or product failure. Please read each section
in its entirety and be sure you understand the information provided in the section and
related sections before attempting any of the procedures or operations given.
xi