Omron CS1W-SLK11-21 - 06-2004 Manual page 90

CX-Programmer Procedures
Node address
Common link CIO Area size CIO Area local node send size: 20 words.
parameters
DM Area size DM Area local node send size: 30 words.
Refresh PLC type
parameters
Start CIO
word
DM
Refresh
nodes
6. Set the settings for node 2 and 3 in the same way. The following example
shows the settings for node 2.
The following example shows the settings for node 3.
Local node address: 1
Select "CV/CVM1"
CIO Area local node data link start address:
CIO 1000.
DM Area local node data link start address: D00500
Node refresh order: 1, 3, 2
Node addresses are listed in order with the starting
node address first. Because here the local node is
listed first, node 1 will first send data and then
received data in order from nodes 3 and then 2.
Section 4-12
73