Omron CS1W-SLK11-21 - 06-2004 Manual page 95

CX-Programmer Procedures
Checking Data Link Tables
Saving Data Link Tables
1,2,3...
Connecting to the Network
1,2,3...
Select PLC to
connect.
PC001_Node 1 shows the SYSMAC Bus connection.
78
Select Data Link Editor [SYSMAC LINK], Table, and then Check. The check
results will be displayed as follows:
Refer to the CX-Programmer Operation Manual (W414) for details on error
messages for the check results of data link tables.
Save the data link tables. Data link tables are saved with an .sl3 extension.
1. Select Data Link Editor SYSMAC LINK, File, and then Save as. The
Save As Dialog Box will appear.
2. Enter the file name (e.g., "Sample"), specify the directory to which to save,
and click the Save button. The file will be saved with an .sl3 extension (e.g.,
"Sample.sl3").
1. Select the PLC to connect to the network from the PLC Network Config-
uration Tool in CX-Net.
Shows the online PLC type and CPU model.
Section 4-12
Shows the connection path. Red when
offline and green when online.