Word Applications - Omron CS1W-SLK11-21 - 06-2004 Manual

Sysmac link units
Table of Contents

Advertisement

Memory Areas
3-6-2

Word Applications

CPU Bus Unit Area
I/O
Word
---
+0
Inputs
+1
(from SYS-
MAC LINK
Unit to CPU
Unit)
+2 to +4
+5
+6
+7
+8 to +22
+23
+24
The applications of the words in the CPU Bus Link Area and DM Area that are
allocated to SYSMAC LINK Units are described in the following tables.
The words allocated in the CPU Bus Unit Area to a SYSMAC LINK Unit are
used to access the status of the SYSMAC LINK System as shown in the fol-
lowing table.
Bit
0 to 15
Reserved by the system.
0
1: Network parameter error
1
1: Data link table error
2
1: Routing table error
3
1: Communications Unit (SYSMAC LINK Unit) setting error
4 to 6
Reserved by the system.
7
1: EEPROM error
8
1: Node address setting error
9
1: Node address duplication error
10
1: Network parameter disagreement error
11
1: Network controller error
12 to 14
Reserved by the system.
15
0: No error log record
1: Error log record(s) exists
0 to 15
Network participation (1 bit per Unit for each of 62 Units)
0: Not participating
0 to 13
1: Participating
14 to 15
Reserved by the system.
0 to 7
Local node address
8 to 15
Local network address
0 to 7
Node address of polling node
8 to 15
Local unit number
0 to 15
Data link status on each node using 4 bits per Unit for each of 62 Units:
CPU Unit operating, CPU Unit error, communications error, no error
0 to 7
(data links operating)
8 to 13
Node address of startup node (for data links)
15
Local Data Link Active Flag
1: Local node data links active.
0: Local node data links not active.
0 to 10
Reserved by the system.
11
0: No power supply
1: Power being supplied (CS1W-SLK11 only)
12 to 15
Reserved by the system.
Item
Section 3-6
Page
---
129
129
129
---
---
---
128
128
---
---
128
40
---
35
36
34
35
56
---
17
---
39

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Sysmac cs1w-slk11Sysmac cs1w-slk21

Table of Contents