Start-Up And Use; What This Chapter Contains; Start-Up Procedure - ABB ACS800-U1 Hardware Manual

Start-up and use

What this chapter contains

This chapter describes the start-up procedure and use of the drive.

Start-up procedure

1.
Ensure that the installation of the drive has been checked according to the
checklist in chapter Installation checklist, and that the motor and driven
equipment are ready for start.
2.
Switch the power on and set-up the drive control program according to the
start-up instructions given in the drive firmware manual.
3.
Validate the Prevention of unexpected start-up function (option +Q950)
according to the instructions given in
of unexpected start-up, +Q950)
4.
Validate the Safe torque off function (option +Q967) according to the
instructions given in
(+Q967), Application guide
Installation of the AGPS board (Prevention
(page 75).
ACS800-01/04/11/31/104/104LC Safe torque off function
(3AUA0000063373 [English]).
Start-up and use 95
11