External +24 V Dc Power Supply For The Rmio Board Via Terminal X34; What This Chapter Contains; Parameter Settings - ABB ACS800-U1 Hardware Manual

External +24 V DC power supply for the RMIO board via terminal X34 169

External +24 V DC power supply
for the RMIO board via terminal
X34

What this chapter contains

This chapter describes how to connect an external +24 V DC power supply for the
RMIO board via terminal X34. For the current consumption of the RMIO board, see
Motor control and I/O board (RMIO)
chapter
Note: External power is easier to supply to the RMIO board via terminal X23, see
Motor control and I/O board (RMIO)
chapter

Parameter settings

In Standard Control Program, set parameter 16.09 CTRL BOARD SUPPLY to
EXTERNAL 24V if the RMIO board is powered from an external supply.
16
(page 85).
(page 85).