Stel REVOLUTION 2500 CE Instruction Manual page 37

MIG MANUAL POLARITY
With this function it is possible change the polarity
of the welding gun only in Manual Mode. This
function is used when it is necessary to weld a
gasless flux cored wire.
Press the button to go into the settings menu.
With the button select MIG-Manual pol .
Press the button CHANGE ( Fig.4,ref.11 ) and next
to MIG-Manual pol . it is possible see STD (
standard ) or REV ( reverse ).
If reverse polarity is chosen on the display this is
what it is possible see .
The REVers polarity is used when you want to use
a flux-cored wire without gas
FACTORY RESET
If it is necessary to do a factory reset press the
button to go into the settings menu.
With the button select Factory Reset .
Press the button CHANGE ( Fig.4,ref.11 ) and then
press the button Ѵ
After that the machine will be on TIG DC mode
with HF ON at 60
6947800020
37