Declaration Of Conformity - Stel REVOLUTION 2500 CE Instruction Manual

Type of equipment
STICK/MIG/TIG Welding Equipment
Type of designation
601863000L – Revolution 2500 CE
Brand name or trade mark
STEL
Manufacturer or his authorized representatives established within the EEA:
Name, address, phone, website:
STEL s.r.l
Via Del Progresso 59; 36020 Castegnero – Vicenza
Italy
Tel +39-0444-639525 Fax +39-0444-639682 www.stelgroup.it
The following harmonized standard in force within the EEA has been used in the design:
EN IEC 60974-1:2022 Ed. 6, Arc welding equipment – Part 1: Welding power sources
EN IEC 60974-10:2021 Ed.4, Arc welding equipment – Part 10: Electromagnetic compatibility (EMC)
EN IEC 60974-3:2019 Ed.4, Arc Striking Device
EN IEC 60974-5:2019 Ed.4, Wire Feeders
EN IEC 61000-3-12, Arc welding equipment – Part 10: Electromagnetic compatibility (EMC) requirements
Additional information: Restrictive use, Class A equipment, intended for use in locations other than
residential.
By signing this document, the undersigned declares as manufacturer, or the manufacturer's authorized
representative established within EEA, that the equipment in question complies with the safety requirements
stated above.
Date
14-03-2024

DECLARATION OF CONFORMITY

According to
The Low Voltage Directive 2014/35/EU
The EMC Directive 2014/30/EU
The RoHS Directive 2011/65/EU
The Ecodesign Directive 2009/125/EC
Signature
Andrea Barocco
6947800020
Position
General Manager
2