Remove The Plinth Covers Of The Power Cabinet; Install The Covers - ABB HVC 200 Operation And Installation Manual

Procedure
1. Close the door (A).
2. Turn the handle (B) counterclockwise.
3. Push the handle.
4. Turn the door key (C) clockwise to lock
the door.
5. Remove the door key (C).
6. Turn the cover plate (D) to cover the
keyhole.
10.3

Remove the plinth covers of the power cabinet

Preliminary requirements
Procedure
1. Remove these parts:
•
•
10.4

Install the covers

Preliminary requirements
HVC 200/300/360-EN | 002
• Set of open spanners
Fasteners (A)
Plinth covers (B)
• Set of open spanners
Access to parts
B
A
2
1
D
4
5
C
B A
• Four nuts with washers M6
(C), four bolts M5 (D)
3
6
B A
69