Connect The Ethernet Cable To The Connector - ABB HVC 200 Operation And Installation Manual

Installation
Procedure
1. Remove the cable from the socket of
the board (A) that is attached to the
DC door (B). Look at the table that
follows, to see which socket belongs
to which outlet.
6.3.14

Connect the ethernet cable to the connector

Preliminary requirements
54
Outlet number of the power cabinet
Outlet 1
Outlet 2
Outlet 3
Outlet 4
•
• Only do this procedure if another procedure refers to it.
A
B
Socket
C (CB 4B)
D (CB 4A)
E (CB 3B)
F (CB 3A)
HVC 200/300/360-EN | 002
F D
E C