Charge Session; Charge An Ev; Start A Charge Session; Stop A Charge Session - ABB HVC 200 Operation And Installation Manual

8.4

Charge session

8.4.1

Charge an EV

1. Park the EV at the charging location.
2. Start the charge session. Refer to section 8.4.2.
3. Stop the charge session. Refer to section 8.4.3.
8.4.2

Start a charge session

1. Follow the EV's instructions to start the charge session.
2. The EVSE shows the progress on the beacon for each outlet. Refer to section
3.4.1.
3. If the charge session does not start, contact ABB E-mobility Inc..
8.4.3

Stop a charge session

Do this procedure to stop a charge session at any time.
1. Follow the instructions of the charging interface or follow the instructions of the
EV.
2. The EVSE shows the current status of a charging session on the beacon lights
for each outlet.
HVC 200/300/360-EN | 002
Note: The charge session stops automatically when the battery is full.
Operation
65