Changing Parameter Settings Using Simatic Pdm; Parameters Accessed Via Pull-Down Menus - Siemens SITRANS LR560 Operating Instructions Manual

Changing parameter settings using SIMATIC PDM

Notes:
• For a complete list of parameters, see
• Clicking on Cancel during an upload from device to SIMATIC PDM will result in some
parameters being updated.
Many parameters are accessed via the 5-level menu in PDM. See
pull-down menus
1) Launch SIMATIC PDM, connect to SITRANS LR560, and upload data from the
device.
2) Adjust parameter values in the parameter value field then press Enter. The status
fields read Changed.
3) Open the Device menu, click on Download to Device, then use File – Save, to save
parameter settings. The status fields are cleared.

Parameters accessed via pull-down menus

You have access to a number of functions via pull-down menus from the menu bar. under
Device or View.
For a complete list, see
Page 44 SITRANS LR560 (PROFIBUS PA) – OPERATING INSTRUCTIONS
on page 44 for the others.
Pull-down menus
pull-down
menus
Parameter Reference
on page 45.
on page 62.
Parameters accessed via
value
fields
7ML19985LT01