Changing Parameter Settings Using Simatic Pdm - Siemens SITRANS LR560 Operating Instructions Manual

Step 4 – Summary
Check parameter settings, and click on BACK to return and revise values, FINISH to save
settings offline, or FINISH AND DOWNLOAD to save settings offline and transfer them to the
device.
The message Quick Start was successful will appear. Click on OK.
7.1.1.6

Changing parameter settings using SIMATIC PDM

Note
• For a complete list of parameters, see Parameter Reference (Page 105).
• Clicking on Cancel during an upload from device to SIMATIC PDM will result in some
parameters being updated.
Many parameters are accessed via pull-down menus in PDM. See Parameters accessed via
pull-down menus (Page 66) for others.
1. Launch SIMATIC PDM, connect to device, and upload data from device.
2. Adjust parameter values in the parameter value field then Enter. The status fields read
Changed.
3. Open the Device menu, click on Download to device, then use File - Save to save settings
offline. The status fields are cleared.
SITRANS LR560 (mA/HART)
Operating Instructions, 06/2017, A5E34647946-AD
Operating
7.1 Remote operation
65