Remote Hydraulic Control System (If Equipped); Remote Control Valve; Remote Control Valve Lever - Kubota LX2620 Operator's Manual

REMOTE HYDRAULIC CONTROL SYSTEM (IF EQUIPPED)

The control valve is equipped with a valve lock feature.
The control valve is locked in the "LOCK" position.
The lock is not intended and will not prevent a leak
down of the implement during the period of storage.
[ROPS model]
(1) Lock lever
[CAB model]
(1) Lock lever
REMOTE HYDRAULIC
CONTROL SYSTEM (IF
EQUIPPED)
The hydraulic auxiliary control valves can be installed
with up to 2 segments.

1. Remote control valve

There are 2 types of remote valves available for these
models.
• Double acting valve.
• Double acting valve with float position:
This valve may be placed in the float mode with the
control lever all the way forward. The cylinder is
free to extend or retract, letting an implement such
as a loader bucket follow the ground.
LX2620,LX2620SU
(A) "UNLOCK" position
(B) "LOCK" position
(A) "UNLOCK" position
(B) "LOCK" position
NOTE :
• Double acting valve with float position cannot
be attached to the 1st position.

2. Remote control valve lever

The remote control valve lever directs pressurized oil
flow to the implement hydraulic system.
Example: Installing double segment valves
1st Double acting valve
2nd Double acting valve with float position
[ROPS model]
(1) Remote control valve lever 1
(2) Remote control valve lever 2
[ROPS model]
HYDRAULIC UNIT
77