Hydraulic Control Unit Reference Chart - Kubota LX2620 Operator's Manual

REMOTE HYDRAULIC CONTROL SYSTEM (IF EQUIPPED)

4. Hydraulic control unit reference chart

In order to handle the hydraulics properly, the operator must be familiar with the following.
Although this information may not be applicable to all types of implements and soil conditions, it is useful for general
conditions.
Implement
Soil condi-
tion
Light soil
Moldboard plow Medium soil
Heavy soil
Disc plow －
Harrow (spike,
spring-tooth,
disc type)
－
Subsoiler and so
on.
Weeder, ridger,
and so on.
Earth mover,
digger, scraper,
manure fork,
rear carrier, and －
so on.
Mower (mid-and
rear-mount type)
Hay rake, ted-
der, and so on.
LX2620,LX2620SU
[ROPS model]
[CAB model]
Top link mounting
holes
(1) Position control lever
Hole set (1):
Hole set (2) is used
only when there is
some obstacle that Position control
prevents you from
using the hole set
(1).
HYDRAULIC UNIT
Gauge
wheel
(1) Telescopic
stabilizers
Yes/No Loose
Yes
Tighten
Yes/No
Remarks
Insert the set-pin
through the slot on
the outer tube that
align with one of
the holes on the
inner bar.
For implements
with gauge
wheels, lower the
implements to the
ground.
Telescopic stabiliz-
er should be tight
enough to prevent
excessive imple-
ment movement
when implement is
in raised position.
For implements
with gauge
wheels, lower the
implements to the
ground.
79