Rear Hydraulic Outlet (If Equipped); Loader/Remote Control Valve Lever; Valve Lock - Kubota LX2620 Operator's Manual

HYDRAULIC UNIT

2.2 Rear hydraulic outlet (if equipped)

With the optional kit in place, oil can be taken out of the
back of the tractor.
[ROPS model]
(1) Rear hydraulic outlet
[CAB model]
(1) Rear hydraulic outlet

2.3 Loader/remote control valve lever

1. Before moving the lever, make sure that the
hydraulic hoses for attachments are connected.
2. Move the lever diagonally ((a), (b), (c) shown in the
figure), and the first and second segments can be
controlled simultaneously.
76
[ROPS model]
(A) "FLOAT" position
[CAB model]
(A) "FLOAT" position
NOTE :
• Move the lever to the "FLOAT" position, and
it will be held
mechanism. To use the valve as a floating
valve with detents, connect the hydraulic
hoses to ports [A] and [B].
• When taking off hydraulic power from port
[D], the flow rate can be adjusted in 2 stages
with the lever.
The flow rate is high at position (R1) and low
at position (R2). Move the lever to position
(R1) or (R2) depending on the attachment in
use.

2.4 Valve lock

WARNING
To avoid personal injury or death from crushing:
• Do not utilize the valve lock for machine
maintenance or repair.
• The valve lock is to prevent accidental actuation
when implement is not in use or during
transport.
AUXILIARY HYDRAULICS
there by the detent
LX2620,LX2620SU