Cruise Control Lever [Lx2620 Cab Model Only] - Kubota LX2620 Operator's Manual

OPERATING THE TRACTOR
To disengage speed set lever
• Depress both brake pedals.
(1) Speed set lever
(2) Speed control pedal
NOTE :
• If you depress the pedal on the forward
acceleration side, the speed set device will
disengage.
• The speed set lever does not disengage when
the individual right or left brake is applied.
• Speed set lever will not operate in reverse.
• When you stand up from the seat with the
speed control pedal stepped on or the speed
set lever engaged (ON), the engine will stop
regardless of whether the machine is moving or
not. This is because the tractor is equipped with
an operator presence control (OPC) system.
IMPORTANT :
• To prevent the damage of speed set lever, do
not depress the reverse pedal when the speed
set lever is engaged.
14. Cruise control lever [LX2620
CAB model only]
WARNING
To avoid personal injury or death:
• Pull the cruise control lever completely to the
rear before starting the engine.
• Do not use the cruise control when driving on
the road.
• Connect both the left and the right brakes to
release the cruise control. The speed-cruise-
control will not be released with single brake
activation.
IMPORTANT :
• Do not depress the speed control pedal
backward to disengage the cruise control.
56
(A) "ON"
(B) "OFF"
(C) Increase
(D) Decrease
Cruise control is designed for tractor operating
efficiency and operator comfort.
This device will provide a constant forward operating
speed by mechanically holding the cruise control lever
at the selected position.
To engage cruise control device
1. The proper forward speed will be maintained if you
apply the cruise control lever at any position.
2. To operate faster than the set speed, depress the
speed control pedal further down in this condition.
The set speed will be resumed if you release the
pedal.
To disengage cruise control device
• Tilt the lever toward the seat, move the lever all the
way back and then to the "NEUTRAL" position to
release the cruise control.
• Depress both brake pedals.
(1) Cruise control lever
NOTE :
• The cruise control device does not disengage
when the individual right or left brake is applied.
• Cruise control device will not operate in
reverse.
• Preferably set the cruise control lever, while
holding down the speed control pedal. This
makes the setting smoother.
• When releasing the cruise mode, return the
cruise control lever fully backward.
STARTING THE TRACTOR
(A) Tilt
LX2620,LX2620SU