Implement Limitations - Kubota LX2620 Operator's Manual

IMPLEMENT LIMITATIONS

IMPLEMENT LIMITATIONS
The tractor has been thoroughly tested for proper performance with implements sold or approved by Kubota.
Using implements that are not sold or approved by Kubota, which exceed the maximum specifications listed in the
following table, or which are otherwise unfit for use with the tractor may result in malfunctions or failures of the tractor,
damage to other property and injury to the operator or others.
Any malfunctions or failures of the tractor resulting from use with improper implements are not covered by the
warranty.
Tread (max. width) with farm tires
Front
935 mm (36.8 in.)
Implement weight and/or size: W1
As in the following list
(See IMPLEMENT SPECIFICATION TABLE on page 33.)
W0 Lower link end max. loading weight - the max. allowable load which can be put on the lower link end
W1 Implement weight - the implement's weight which can be put on the lower link
W2 Max. drawbar load
W3 Trailer loading weight - the max. loading weight for trailer (with trailer's weight)
NOTE :
• Implement size may vary depending on soil operating conditions.
• For selecting implements, contact your local dealer.
• Strictly follow the instructions outlined in the operator's manual of the mounted or trailed machinery or
trailer, and do not operate the combination of tractor-machine or tractor-trailer unless all instructions
have been followed.
• This tractor is not designed, nor intended to be used in a forestry application. Forestry applications
present the following hazards:
– Toppling trees, primarily in the case of when a rear-mounted tree-grab crane is mounted at the rear of
the tractor
– Penetrating objects in the operator's enclosure, primarily in the case of when a winch is mounted at
the rear of the tractor
To address with these and other related hazards, the tractor requires additional and optional equipment
such as an operator-protective structure (OPS) and a falling object-protective structure (FOPS). Optional
equipment such as an OPS and a FOPS, however, are not available for this tractor.
Without optional equipment such as an OPS and a FOPS, the use of the tractor is limited to tractor-
specific applications like transport and stationary work.
32
Rear
1050 mm (41.3 in.)
Actual figures
Max. drawbar load: W2
500 kg (1100 lbs.)
Lower link end max. lifting capacity: W0
360 kg (800 lbs.)
Trailer loading weight max. capacity:
W3
1500 kg (3300 lbs.)
LX2620,LX2620SU