Dual Remote Hydraulic Control System; Control Lever And Hydraulic Hose Connections - Kubota LX2620 Operator's Manual

AUXILIARY HYDRAULICS
[CAB model]
(1) Port (c)
2. Dual remote hydraulic control
system
The tractor is equipped with the double-acting 2-
segment hydraulic control valve for front loader.
To apply the hydraulic power take-off for general
attachments, keep the following point in mind.
2.1 Control lever and hydraulic hose
connections
Connect the control lever in its specified direction and
the hydraulic hoses to their specified ports.
[ROPS model]
(1) Loader control lever
LX2620,LX2620SU
(R) Right
(L) Left
(U) Up
(D) Down
[CAB model]
(1) Loader control lever
Pressure
Returning
Hydraulic outlet ports of first segment
Lever UP
(A) In
Port
(B) Out
Hydraulic outlet ports of second segment
Lever RIGHT
(C) In
Port
(D) Out
IMPORTANT :
To avoid damage of the attachments:
• Do not connect attachments through the
hydraulic motor to the [C] and [D] ports. If the
control lever is moved to the Regeneration
position (R1), the seals on the hydraulic motor
will be damaged.
• This control valve
Regeneration position. When the [C] and [D]
ports are used to take off hydraulic power for
the hydraulic cylinder, connect the [C] port to
the "Head-End" side port of the hydraulic
cylinder.
• Make the following connections when using this
valve to take off hydraulic power for the
hydraulic cylinder.
Colored coupler
[B: yellow], [C: blue]
[A: white], [D: red]
• For the attachment side, the couplers made by
Parker Hannifin are recommended.
HYDRAULIC UNIT
(R) Right
(L) Left
(U) Up
(D) Down
DOWN
Out
In
LEFT
Out
In
is provided with the
Hydraulic cylinder port
Head-end side
Rod-end side
75