Auxiliary Hydraulics; Hydraulic Block Type Outlet; Remote Hydraulic Control System (If Equipped); Remote Control Valve - Kubota STW34 Operator's Manual

AUXILIARY HYDRAULICS

BHydraulic Block Type Outlet
Hydraulic block type outlet is useful when adding
hydraulically operated implement such as: front end
loader, front blade, etc.
When implement is attached
1. Remove the block cover.
2. Route the implement inlet, outlet, and return hoses as
shown in the illustration.
(1) Block cover (A) From gear pump
(B) To implement
(C) From implement (Outlet)
Max flow
30.0 L/min
Max pressure
17.2 MPa (175 kgf/cm )
REMOTE HYDRAULIC CONTROL SYSTEM
(if equipped)
BRemote Control Valve
There are 3 types of remote valves available for these
models.
A Single acting valve :
A Double acting valve :
A Single/double acting valve :
This valve can be utilized as single or double acting
valve by adjusting the auxiliary control valve selector
lever located on the valve.
(1) Turn the auxiliary control valve selector lever
clockwise all the way to utilize as single acting
valve.
(2) Turn the auxiliary control valve selector lever
counter-clockwise all the way to utilize as double
acting valve.
(1) Auxiliary control valve selector lever
(2) Single/double acting valve
(3) Double acting valve
(4) Single acting valve
HYDRAULIC UNIT
(A) Single acting
(B) Double acting
45